About us Contact

搜索

Search

Jiangsu Duopusen Chemical Technology Co., Ltd.





Homepage

/

Product center

/

High chlorinated polyethylene coating series

/

High chlorinated polyethylene primer

Product

All categories



Number of views:

1015

High chlorinated polyethylene primer

High chlorinated polyethylene is used as the main film-forming material, and different modified resins, plasticizers, solvents, additives and anti-rust pigments are added. The product has excellent construction performance and thick coating, and the paint film is tough and wear-resistant, and the rust-proof performance is good.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1015

Product serial number

Category

High chlorinated polyethylene coating series

Quantity

-

+

Stock:

0



1

产品描述

555

product manual

High chlorinated polyethylene is used as the main film-forming material, and different modified resins, plasticizers, solvents, additives and anti-rust pigments are added. The product has excellent construction performance and thick coating, and the paint film is tough and wear-resistant, and the rust-proof performance is good.

Product Usage

It is suitable for use as anti-rust paint for onshore steel structures and steel machinery and equipment. It can be used with traditional top coats such as phenolic and alkyd.

Physical characteristics

colour	Gray, iron red
Volume solids (mixed)	51±3%
Recommended film thickness	Gray, iron red
Theoretical dosage	0.112kg/㎡ @40μm
Dry（23±2℃）	≤1h
Hard work（23±2℃）	≤12h
Fully cured（23±2℃）	7d

Surface treatment

The surface of the steel structure is sandblasted to Sa21/2 or above, and the surface roughness reaches 30~75μm;

The surface to be painted should be kept dry and clean without debris.

Construction instructions

The mixing ratio	Single component Stir well with mechanical agitation
Maturing time	After the barrel is opened, the lid of the bucket is tightly closed for the next use.
Thinner	PT special thinner

Construction method

Painting method	Brushing, roller coating (applicable)	Air spray (applicable)	Airless spray (recommended)
Dilution rate	0~10%	0~10%	0~5%

Airless spraying: ejection pressure: 15~17MPa

Nozzle diameter: 0.43~0.53mm

Air spray: Adjust the viscosity with the matching diluent: 25-30 S (coating -4/23 ± 2 °C)

Recoat interval

Construction temperature	5℃	20℃	30℃
Minimum recoating time	24h	12h	8h
Maximum recoating time	Unlimited	Unlimited	Unlimited

* When the paint film is exposed for a long time outdoors or the surface is smooth, it has a bad influence on the adhesion of the heavy coating. Therefore, the surface of the paint film must be subjected to brushing, sand sweeping or high-pressure fresh water rinsing, and sufficient time can be maintained during recoating. Interlayer adhesion.

Tool cleaning

All tools must be cleaned with PT special thinner after use.

Safety

Use this product with care. Please refer to the MSDS of this product before starting work.

Please pay attention to the safety precautions on the packaging label before and during use. In addition, the safety regulations prescribed by the relevant national or local government should also be observed.

Personal protection includes, but is not limited to, lung, eye and skin protection. If swallowed or otherwise in contact with this product, seek medical attention immediately. Precautions must be taken to prevent fire, explosion and environmental protection.

Scan the QR code to read on your phone

Our professional production and development of high performance heavy anti-corrosion coating

Widely used in petrochemical, marine engineering, engineering machinery, various types of ships, steel structures, bridges, wind power facilities, containers, etc., supplemented by floor coatings, fireproof coatings, temperature-resistant coatings, interior and exterior wall coatings, etc. .

Contact us :

Home About Us Products Projects News Qualification Contact Us

Jiangsu Zhongren Paint Co., Ltd. Powered by www.300.cn 苏ICP备19024502号-2